Cover image: a stylised radiator with three fans, two tubes running to a round pump block with temperature bars

AIO Liquid Cooler Buying Guide 2026: 240, 280 or 360 mm?

Choosing an AIO liquid cooler for your gaming PC: radiator size and thickness, tube length, pump placement, connectors and warranty, plus six models on Amazon.de.

* Ad link: As an Amazon Associate I earn from qualifying purchases. Links go to Amazon.de – the price stays the same for you.

Contents
  1. Air cooler or AIO?
  2. What to look for
  3. Which size suits which PC?
  4. Six example models
  5. Comparison
  6. Pre-purchase checklist
  7. FAQ
  8. Sources

An AIO liquid cooler (all-in-one) is a sealed cooling loop: the pump and cold plate sit on the CPU, and two tubes run to a radiator with fans that dumps the heat into the case air. There is nothing to fill and no tubing to route, because the loop comes pre-filled. There are still a few things to check before you buy: Will the radiator fit your case? Are the tubes long enough? How does the pump connect? This guide walks through each point. At the end we list six models available on Amazon.de.

Transparency: We have not tested these coolers ourselves. Specifications come from ARCTIC, Corsair, NZXT, be quiet! and the Amazon.de product pages we checked (November 2026). We deliberately don't quote prices because they change constantly.

Air cooler or AIO?

For most gaming PCs, a good tower air cooler is enough. It has no pump that can fail and usually costs less. An AIO mainly makes sense when:

  • your case doesn't have enough CPU cooler height for a large tower,
  • you want room and a clean look above the motherboard, since only the small pump block sits on the CPU,
  • your case already has mounts for a 240 to 360 mm radiator.

How to read TDP ratings, which air coolers are worth a look and why many CPUs ship without a cooler is covered in our CPU cooler buying guide.

What to look for

1. Radiator size: 240, 280 or 360 mm

The number describes the fan area: 240 mm means two 120 mm fans, 280 mm two 140 mm fans, 360 mm three 120 mm fans. More radiator area means more surface to shed heat. The radiator itself is longer than the number suggests: the Corsair NAUTILUS 240 RS measures 276 mm, the 360 version 396 mm, and the ARCTIC Liquid Freezer III Pro 280 is 317 mm long and 138 mm wide.

A 280 mm radiator needs 140 mm fan mounts in the case. Many cases list front and top support separately; often the front takes 360 mm while the top only takes 240 mm. Check this in your case specs, and see our PC case buying guide for more.

2. Thickness: radiator plus fans

Besides length and width, thickness matters. Typical radiators are 27 mm thick, plus 25 mm for the fans: be quiet! lists 52 mm in total. ARCTIC uses a 38 mm radiator on the Liquid Freezer III Pro, which it says holds more liquid and dissipates heat better. In exchange, ARCTIC says it needs at least 63 mm of clearance. That can get tight in the top of a case, especially with tall RAM. A front radiator also eats into graphics card length.

3. Tube length

The tubes have to reach from the CPU to the radiator position. The models in this guide have 400 to 450 mm. NZXT says the 400 mm on the Kraken Plus 240 is enough for a top or front mount in most mid-towers. For large cases or unusual positions, check the spec sheet.

4. Pump placement

An often overlooked point: Corsair recommends mounting the radiator higher than the pump. Every loop contains a little air, and it collects at the highest point. If that point is the radiator, the air stays out of the pump, where it can otherwise cause gurgling or rattling. Corsair names these as good positions:

  • top of the case, tubes pointing down,
  • front, with the tube connections at the bottom of the radiator.

According to Corsair, a front mount with the tubes at the top is a last resort. In that case the pump must at least sit lower than the top of the radiator.

5. Socket and mounting

According to the manufacturers, all six models support AMD AM5 and AM4 and Intel LGA 1851 and LGA 1700, the current gaming platforms. The ARCTIC Liquid Freezer III Pro includes a contact frame for Intel that spreads the mounting pressure. Corsair and NZXT ship the cold plate with pre-applied thermal paste, ARCTIC includes MX-6 thermal paste (0.8 g). If you remount the cooler, you need fresh paste; see our thermal paste buying guide.

6. Connectors and software

This is where the models differ most:

  • Corsair NAUTILUS RS, be quiet! Pure Loop 3 and ARCTIC: the pump and fans plug straight into the motherboard's 4-pin fan headers. No extra software is needed; the BIOS controls the speeds.
  • ARCTIC Liquid Freezer III Pro: a single cable combines the pump, radiator fans and the extra VRM fan, which also cools the motherboard's voltage regulators.
  • NZXT Kraken Plus: according to NZXT, the cable from the pump needs an internal USB 2.0 header and SATA power from the PSU. In return, you control the pump, fans and 1.54-inch LCD in NZXT CAM.
  • ARGB: lit versions like the NAUTILUS 360 RS ARGB also need a 5 V ARGB header on the motherboard.

7. Warranty and maintenance

An AIO has one more moving part than an air cooler, so check the warranty: 6 years from ARCTIC and NZXT, 5 years from Corsair, 3 years from be quiet!. The be quiet! Pure Loop 3 has an easy-to-reach refill port for topping up coolant later. The makers of the other models in this guide don't mention one.

Which size suits which PC?

  • Small mid-tower, top limited to 240 mm: a 240 mm cooler with a 27 mm radiator is the safe choice.
  • Case with 140 mm mounts: a 280 mm cooler uses the larger, slower-spinning fans.
  • Plenty of room at the front or top: 360 mm gives the most headroom, but check the remaining GPU length.
  • Less cable clutter: models with daisy-chained fans or a combined cable (Corsair, be quiet!, ARCTIC).

Six example models

These are not test winners but examples of different sizes and feature sets. All were in stock on Amazon.de when we checked (German delivery address, November 2026).

Example model

Thick radiator with VRM fan: ARCTIC Liquid Freezer III Pro 240

A 240 mm cooler with a 38 mm radiator, two P12 Pro fans and a small PWM-controlled VRM fan on the pump block. The fan cables run inside the tube sleeving, so only one cable goes to the motherboard. ARCTIC says the cold plate is offset towards the CPU hotspot.

Radiator
277 × 120 × 38 mm, aluminium
Fans
2 × P12 Pro, 600–3000 rpm
Pump
800–2800 rpm (PWM)
Tubes
450 mm
Sockets
AM5, AM4, LGA 1851, LGA 1700
Warranty
6 years

Good for you if you have a 240 mm mount with enough depth and want tidy cabling. Sold by ARCTIC, shipped by Amazon.

View on Amazon.de*Ad link

Example model

For 140 mm mounts: ARCTIC Liquid Freezer III Pro 280

Same design as the 240, but with two 140 mm fans (P14 Pro) on a radiator that is 317 mm long and 138 mm wide. The VRM fan, Intel contact frame and MX-6 thermal paste are included here too.

Radiator
317 × 138 × 38 mm, aluminium
Fans
2 × P14 Pro, 400–2500 rpm
Pump
800–2800 rpm (PWM)
Tubes
450 mm
Sockets
AM5, AM4, LGA 1851, LGA 1700
Warranty
6 years

Good for you if your case takes 280 mm radiators. Sold and shipped by ARCTIC.

View on Amazon.de*Ad link

Example model

Slim and unlit: Corsair NAUTILUS 240 RS

A 240 mm cooler with a 27 mm radiator, two RS120 fans with Zero RPM mode and a pump Corsair rates at 20 dBA. The pump and fans connect straight to the motherboard, and the fans can be daisy-chained. A Corsair controller is optional if you want to use iCUE.

Radiator
276 × 120 × 27 mm, aluminium
Fans
2 × RS120, up to 2100 rpm, 10–36 dBA
Tubes
400 mm
Sockets
AM5, AM4, LGA 1851, LGA 1700
Warranty
5 years

Good for you if you want a simple 240 mm cooler for a tight top mount. Sold and shipped by Amazon.

View on Amazon.de*Ad link

Example model

360 mm with ARGB: Corsair NAUTILUS 360 RS ARGB

The large version with three RS120 ARGB fans and a lit pump cap (8 LEDs each in the pump and fans). The motherboard controls the lighting through its 5 V ARGB header, so no extra software is needed.

Radiator
396 × 120 × 27 mm, aluminium
Fans
3 × RS120 ARGB, up to 2100 rpm
Tubes
450 mm
Sockets
AM5, AM4, LGA 1851, LGA 1700
Warranty
5 years

Good for you if your front or top takes 360 mm and you want lighting controlled by the motherboard. Sold and shipped by Amazon.

View on Amazon.de*Ad link

Example model

With a display: NZXT Kraken Plus 240

A 240 mm cooler with a 1.54-inch LCD (240 × 240 pixels) in the pump cap. Through NZXT CAM it shows temperatures, images or animations, and you can rotate the orientation in software. Two F120P fans with Zero RPM mode are included.

Radiator
281 × 120 × 27 mm, aluminium
Display
1.54 in, 240 × 240 px, 30 Hz
Pump
1,200–2,800 rpm
Tubes
400 mm
Connections
internal USB 2.0, SATA power, fans
Warranty
6 years

Good for you if you want a display in your PC and your motherboard has a free USB 2.0 header. Sold and shipped by Amazon.

View on Amazon.de*Ad link

Example model

With a refill port: be quiet! Pure Loop 3 240mm

A 240 mm cooler with a PWM pump (3,000–5,500 rpm) and two daisy-chainable Pure Wings 3 fans. be quiet! rates the fans at 15.4 dB(A) at half speed and 35.2 dB(A) at full speed. The refill port on the radiator lets you top up coolant.

Radiator
277 × 120 × 27 mm (52 mm with fans)
Fans
2 × Pure Wings 3 120 mm, up to 2100 rpm
Pump
3,000–5,500 rpm (PWM)
Tubes
400 mm
Sockets
AM5, AM4, LGA 1851, 1700, 1200, 115x
Warranty
3 years

Good for you if you want a quiet, plain 240 mm cooler without lighting. Sold by a third-party seller (okluge), shipped by Amazon.

View on Amazon.de*Ad link

Comparison

Model Radiator Thickness Tubes Highlight Warranty
ARCTIC Liquid Freezer III Pro 240 240 mm 38 mm 450 mm VRM fan 6 years
ARCTIC Liquid Freezer III Pro 280 280 mm 38 mm 450 mm 140 mm fans 6 years
Corsair NAUTILUS 240 RS 240 mm 27 mm 400 mm no RGB 5 years
Corsair NAUTILUS 360 RS ARGB 360 mm 27 mm 450 mm ARGB 5 years
NZXT Kraken Plus 240 240 mm 27 mm 400 mm LCD 6 years
be quiet! Pure Loop 3 240mm 240 mm 27 mm 400 mm refill port 3 years

All figures are manufacturer specs.

Pre-purchase checklist

  1. Where will the radiator go (front or top), and what size does the case allow there?
  2. Does the combined radiator and fan thickness fit, considering RAM height and GPU length?
  3. Are the tubes long enough to reach from the CPU to the radiator?
  4. Will the radiator sit higher than the pump (top mount, or front with tubes at the bottom)?
  5. Does the cooler support your socket (AM5, LGA 1851 …)?
  6. Does your motherboard have enough fan headers, and a free USB 2.0 header for NZXT?

FAQ

Do I need to refill an AIO liquid cooler?

No, the loop is sealed and filled at the factory. The be quiet! Pure Loop 3 also has a refill port in case it loses coolant over the years.

Is a 360 mm AIO always better than a 240 mm one?

It has more area and therefore more headroom, but it also needs more space. If your case only fits 240 mm at the top, or a front radiator would block your graphics card, the 240 mm cooler is the better choice.

Can the pump be the highest point?

Corsair advises against it: the radiator should sit higher than the pump so air collects in the radiator rather than the pump. If a freshly installed AIO gurgles, Corsair says air in the pump is often the cause.

Do I need software for an AIO?

Not for the Corsair NAUTILUS RS, be quiet! Pure Loop 3 or ARCTIC, which are controlled through the motherboard's fan headers. The NZXT Kraken Plus with its display is controlled via NZXT CAM.

Will an AIO fit my CPU?

According to the manufacturers, all six models support AM5, AM4, LGA 1851 and LGA 1700. Which CPU suits your gaming PC is covered in our CPU buying guide.

Sources

As of November 2026. Specifications come from the manufacturers and the Amazon.de product pages we checked (ASINs in the article):

Manufacturers occasionally change specs and bundle contents. If anything important changes, we'll update this guide.

* Ad link: As an Amazon Associate I earn from qualifying purchases. Links go to Amazon.de – the price stays the same for you.