Cover image: a hand-drawn anti-static mat with a magnetic tray full of screws, a large and a precision screwdriver and a grounding wrist strap

Tools for Building a PC: What You Actually Need – Buying Guide 2026

PH2, PH0, anti-static wrist strap or mat? The tools you need to build a PC, what's optional – plus six picks available on Amazon.de.

* Ad link: As an Amazon Associate I earn from qualifying purchases. Links go to Amazon.de – the price stays the same for you.

Contents
  1. The short version: what you need
  2. PH2 and PH0: which screws are inside a PC?
  3. Anti-static: wrist strap, mat or nothing?
  4. Staying organised: where do the screws go?
  5. Six tools for building a PC
  6. Comparison at a glance
  7. Checklist before you start
  8. FAQ
  9. Sources

Building your first gaming PC takes fewer tools than most kits suggest. One good Phillips screwdriver handles nearly everything. Add a small driver for the M.2 SSD, somewhere to keep the screws and, depending on your room, some protection against electrostatic discharge. This guide covers what you really need, what simply helps, and six tools that are available on Amazon.de.

Transparency: We have not tested these tools ourselves. The information comes from Intel, MSI, ASUS, Wera, iFixit, HAZET and the Amazon.de product pages we checked (as of November 2026). We don't list prices because they change constantly.

The short version: what you need

Intel's guide to building a gaming PC names a Phillips #2 (PH2) screwdriver for almost every job. If you install an M.2 SSD, you also need a PH0 for the tiny screw at the slot. According to Intel, everything else is helpful but not essential:

  • Must-have: PH2 screwdriver, plus PH0 for an M.2 SSD
  • Very useful: a tray or compartments for screws, good lighting, scissors or flush cutters for cable ties
  • Optional: anti-static wrist strap or anti-static mat
  • Also: a USB flash drive with at least 8 GB for the Windows installer (per Intel)

Which parts go into the build is covered in the gaming PC buying guide.

PH2 and PH0: which screws are inside a PC?

The case, motherboard, power supply and graphics card are mostly held by Phillips screws, which is what the PH2 is for. The M.2 SSD screw is much smaller. In its motherboard manuals, MSI describes inserting the SSD into the slot at an angle, pressing it down and securing it with the M.2 screw.

Not every board still needs a screwdriver for that. ASUS's installation guide shows motherboards with M.2 Q-Release, where a mechanism holds the heatsink and SSD in place. Check your motherboard manual before buying a PH0 just for this. You'll find a suitable board in the motherboard buying guide.

Magnetic or not?

Intel explicitly recommends magnetic screwdrivers: they stop screws from falling into the case and, according to Intel, shouldn't damage components.

Anti-static: wrist strap, mat or nothing?

Electrostatic discharge (ESD) can damage sensitive components. Intel says an anti-static wrist strap isn't strictly necessary, that discharge damage is rare and that the straps are cheap. Your workspace matters more: Intel advises building at a large table and not on carpet.

How the gear works:

  • Wrist strap: you wear it on your wrist and connect it to ground with a cord. iFixit lists 1 MΩ resistance and a 2 m coiled cord for its strap.
  • Mat: components and case rest on a dissipative surface. According to the Amazon listing, iFixit's portable mat connects to a ground such as a radiator, and the wrist strap clips onto the mat.

For a one-off build the wrist strap is enough. The mat pays off if you work on PCs regularly or want a safe place to set parts down.

Staying organised: where do the screws go?

Every component comes with its own screws, and many look alike. Intel recommends magnetic trays or anything with several small compartments, even an empty egg carton. Many bit kits have a sorting tray in the lid. Intel also suggests several light sources, such as a desk lamp or flashlight, so you can see into the corners of the case.

Six tools for building a PC

These products aren't test winners, just examples for each job. All were in stock on Amazon.de and shipped by Amazon when we checked (delivery address Berlin, 18 November 2026).

Example model

The key screwdriver: Wera 350 SK PH 2

A single PH2 Phillips screwdriver with a large Kraftform Plus handle. Wera says the Lasertip tip prevents cam-out from the screw head, and the hexagonal handle stops it from rolling away.

Tip
Phillips PH 2, Lasertip
Blade length
100 mm
Overall length
205 mm
Blade
Hexagonal with bolster

Right for you if you want a sturdy screwdriver for the case, motherboard and PSU. Sold and shipped by Amazon.

View on Amazon.de*Ad link

Example model

For M.2 and small screws: Wera Kraftform Micro 12

Twelve electronics screwdrivers in a belt pouch. For a PC build the PH 0 matters most; Wera has modified it according to the Japanese JCIS 0 standard. The rotating cap on the end of the handle allows fast spinning.

Phillips
PH 00, PH 0
Torx
TX 5, TX 6 (with holding function)
Others
5 × slotted, 3 × hex
Storage
Robust pouch

Right for you if you'd rather use fixed screwdrivers than bits for M.2 screws and other small electronics screws. Sold and shipped by Amazon.

View on Amazon.de*Ad link

Example model

All in one kit: iFixit Pro Tech Toolkit (Black)

A bit kit with driver handle and accessories for electronics repair. It covers PH2 and smaller Phillips sizes and includes tweezers, a spudger and a grounding wrist strap. The lid of the bit case doubles as a sorting tray.

Bits
64, 4 mm, S2 steel
Phillips
up to PH2
Accessories
Spudger, tweezers, suction handle, anti-static wrist strap
Storage
Tool roll, case with sorting tray

Right for you if you also want to open consoles, controllers or laptops yourself. For lots of case screws, a large PH2 handle is more comfortable than the slim bit driver. Sold by iFixit Europe, shipped by Amazon.

View on Amazon.de*Ad link

Example model

Against discharge: iFixit Anti-Static Wrist Strap

Adjustable wrist strap with coiled cord and alligator clip for grounding.

Resistance
1 MΩ
Cord
Coiled, 2 m
Band
Elastic, adjustable buckle
Size
Adjustable up to XL

Right for you if you want simple protection while you build. Sold by iFixit Europe, shipped by Amazon.

View on Amazon.de*Ad link

Example model

Work surface: iFixit Portable Anti-Static Mat

A foldable mat to set the motherboard, graphics card and other parts on safely. A wrist strap and a grounding cord with alligator clip are included.

Size
60 × 60 cm
Surface resistivity
10⁷–10⁹ Ω
Standards
Designed to meet ESD S4.1 and ESD S20.20
Included
Grounding cord, wrist strap (1 MΩ, 1.8 m)

Right for you if you work on PCs often or want a safe place for parts before installing them. Sold by iFixit Europe, shipped by Amazon.

View on Amazon.de*Ad link

Example model

For the screws: HAZET 197-3 Magnetic Tray

A round plastic tray with a rubber-coated magnet in the base. It holds steel screws and sticks to metal surfaces.

Diameter
150 mm
Material
ABS plastic
Magnet
80 mm, approx. 2.5 kg pull force, magnetic on both sides
Weight
0.38 kg

Right for you if you're done hunting for screws under the desk. Sold and shipped by Amazon.

View on Amazon.de*Ad link

Comparison at a glance

Tool Job Essential?
Wera 350 SK PH 2 Case, motherboard, PSU yes
Wera Kraftform Micro 12 M.2 screw (PH 0) for M.2 with a screw
iFixit Pro Tech Toolkit Complete kit for PC and electronics alternative to both Weras
iFixit Anti-Static Wrist Strap Discharge protection optional
iFixit Anti-Static Mat ESD-safe surface optional
HAZET 197-3 Magnetic Tray Sorting screws useful

Checklist before you start

  • PH2 ready, plus a PH0 for the M.2 SSD (unless your board has a tool-free latch).
  • A large table, no carpet underneath you.
  • A tray or compartments for each component's screws.
  • Light from several sides, plus a flashlight.
  • Scissors or flush cutters for cable ties and packaging.
  • Thermal paste if your cooler doesn't come with it applied – see the thermal paste buying guide.
  • A USB flash drive with at least 8 GB for the Windows installer.

Regular cleaning keeps the PC cool later on; the right gear is in our guide to cleaning your PC with an air duster.

FAQ

Is a regular household Phillips screwdriver enough?

Yes, if it's a PH2. Intel names the PH2 for almost every step of a PC build. You only need an extra PH0 for the tiny M.2 screw.

Do I absolutely need an anti-static wrist strap?

No. Intel calls the strap not strictly necessary, but useful and cheap. Either way, don't build on carpet.

Can a magnetic screwdriver damage components?

According to Intel, no. Intel actually recommends magnetic screwdrivers because they hold on to screws that would otherwise drop into the case.

Do I need a Torx screwdriver?

Usually not for a standard PC build; Intel names the PH2 for almost every job. Torx and specialty bits are more relevant when you open consoles, controllers or laptops, and that's where a bit kit like the iFixit Pro Tech makes sense.

Sources

As of November 2026. Product specifications come from the manufacturers and the Amazon.de product pages we checked.

* Ad link: As an Amazon Associate I earn from qualifying purchases. Links go to Amazon.de – the price stays the same for you.