USB-C Charger for Switch 2 and Steam Deck: Watts, PD and TV Mode – Buying Guide 2026

The original charger is stuck in the living room, and you want a second one for the office, for travel or as a spare. Is any USB-C charger good enough? For phones, usually yes. For the Switch 2 and the Steam Deck, it depends on the watts, and in the Switch 2's TV mode weak chargers fail outright.

This guide covers what Nintendo and Valve require, what an independent lab test shows for the Switch 2 dock, what to look for in cables and multi-port chargers, and five models available on amazon.de.

Transparency: We have not tested these chargers ourselves. The basics come from Nintendo, Valve, the USB-IF, Anker and a compatibility test by ChargerLAB. The product details come from the verified amazon.de pages (as of November 2026). We don't list prices because they change constantly.

What the Switch 2 and Steam Deck require

Nintendo Switch 2

According to Nintendo, the Switch 2 charges with its own adapter (model NGN-01) and also with the old Switch adapter (HAC-002). The old one only works when plugged straight into the console. In TV mode in the Switch 2 dock, its output isn't enough.

For adapters without a Nintendo license, Nintendo's support page names a floor: at least 54W. Nintendo adds that such products aren't tested by Nintendo and may have compatibility problems. A full charge takes about three hours, according to Nintendo.

Steam Deck

Valve specifies a USB-C power supply with PD 3.0 and 45W for the Steam Deck, for both the OLED and the LCD model. ChargerLAB measured the original charger at roughly 39W input power. Of 80 third-party chargers it tested, more than half reached 35W or more. So the Deck charges fine with many chargers. A 65W model won't charge the Deck any faster, but it can power a phone or laptop on the side.

The Switch 2's TV mode is the hurdle

ChargerLAB tested the Switch 2 in its dock with almost 100 chargers. The results:

• 20W chargers couldn't activate TV mode; only about 3W arrived.
• 35W chargers failed too, with about 13W arriving.
• Only chargers with 60W or more activated it. They have to output 20V and deliver 3A.
• Even with the original, measured power in the dock was only about 18W. The rest is headroom.

Note that this is a lab test by an independent publisher, not a Nintendo test. Nintendo itself only names 54W as the floor. To be safe, choose a charger with 20V/3A (60W) or more. According to manufacturer and Amazon listings, the 65W models below state 20V and 3.25A.

Watts, PD and PPS in plain terms

• Watts: The charger can offer more than the device draws. The device only takes what it needs. Too little means slow charging, or with the Switch 2, no TV picture.
• USB Power Delivery (PD): Charger and device negotiate the voltage, for example 15V for the Steam Deck or 20V for the Switch 2. Look for "PD" in the specs, not just marketing terms like "fast charging".
• PPS: An extension that regulates voltage in finer steps. Handy for phones. You don't need it for the Switch 2 or Steam Deck.
• GaN: A construction method that makes chargers smaller. It has no effect on gaming performance.

Multiple ports: power gets shared

On chargers with two or three ports, the big number only applies to one port on its own. Once a second device is plugged in, the charger splits the power. One example: another Belkin model with 65W and two ports lists 65W for a single port and 45W plus 20W when both are in use, according to its Amazon listing. For the Switch 2 in TV mode, that means plug it into the charger alone, or check how much power is left when both ports are used. The Amazon pages don't state the split for every model. When in doubt, check the manufacturer's label on the housing.

Don't forget the cable

According to the USB specification, standard USB-C cables are rated for 3A, which is 60W at 20V. Cables meant to carry more than 3A must contain an e-marker chip, per the USB-IF. For the Switch 2 in TV mode and for the Steam Deck, a decent cable rated for 60W is enough. A thin phone cable can hold things back. Nintendo's original adapter has a detachable cable; third-party models often come without one. According to its listing, the Anker below ships without a charging cable.

Five example models

The following chargers were available on amazon.de with shipping by Amazon when checked (November 2026). They are not test winners, just examples for different needs. All details come from the amazon.de pages or, where stated, from the manufacturer.

Example model

The original: Nintendo Switch 2 AC adapter

According to the Amazon listing, a replacement for the adapter that comes with every Switch 2. It fits the console and the Switch 2 dock, and the adapter and cable can be separated. The listing says it is only compatible with Nintendo Switch 2. Sold and shipped by Amazon.

Use

Switch 2, console and dock

Cable

detachable, can be stored separately per the listing

Compatibility

Switch 2 only

Approval

by Nintendo

A good fit if you want a second adapter for the Switch 2 and no compatibility questions.

View on Amazon.de*Ad link

Example model

Small and single-port: Anker Nano II 65W

A single USB-C port. According to Anker, the charger outputs 5V/3A, 9V/3A, 15V/3A and 20V/3.25A (65W max.). That covers the Steam Deck's 15V and the Switch 2's 20V. According to the Amazon listing, no charging cable is included. Sold by AnkerDirect DE, shipped by Amazon. The Amazon description says "67W" in one place; the title and technical data say "65W", and the manufacturer's spec applies.

Output

65W (20V/3.25A)

Ports

1 × USB-C

Profiles

5V, 9V, 15V, 20V

Cable

not included

A good fit if you want a small charger for the Switch 2 or Steam Deck that fits in a bag, without multi-device charging.

View on Amazon.de*Ad link

Example model

Three ports: UGREEN Nexode 65W

2 × USB-C and 1 × USB-A. According to the listing, the C1 port delivers up to 65W on its own, with 20V and 3.25A stated. PD 3.0 and PPS are supported. The page explicitly lists the Steam Deck as compatible. With several devices connected, the power is shared. Seller UGREEN Group Limited UK, shipped by Amazon. No cable included.

Output

65W on port C1

Ports

2 × USB-C, 1 × USB-A

Protocols

PD 3.0, PPS

Cable

not included

A good fit if a Deck or Switch 2, a phone and headphones should all charge at the desk.

View on Amazon.de*Ad link

Example model

Two ports from Belkin: BoostCharge Pro 67W

Two USB-C ports, 67W according to the listing with 20.64V and 3.25A, PD 3.1, PPS and GaN. Sold and shipped by Amazon. The page offers several variants, such as charger only or with a USB-C cable. Check which variant is selected before ordering.

Output

67W

Ports

2 × USB-C

Protocols

PD 3.1, PPS

Variants

with or without cable

A good fit if you want to charge two USB-C devices and prefer a well-known accessory brand.

View on Amazon.de*Ad link

88 g

Example model

Budget pick for the Steam Deck: Baseus PicoGo 45W

One USB-C port with 45W (20V/3A per the listing), PD 3.0 and PPS. The title mentions the Steam Deck. For the Switch 2 it sits below Nintendo's 54W floor, so it isn't suited as a dock charger. Sold by Baseus DE Official Store, shipped by Amazon, cable not included.

Output

45W

Ports

1 × USB-C

Protocols

PD 3.0, PPS

Weight

88 g

A good fit if you only want to charge a Steam Deck or a phone and need a compact travel charger.

View on Amazon.de*Ad link

Extra: PlayStation Portal and controllers

The PlayStation Portal needs far less. According to Sony, a USB-C charger with USB PD and at least 5 V / 3 A is enough, and it reaches full charging speed at 15 W. A small 20W charger does the job. More in the PlayStation Portal accessories buying guide.

Example model

Tiny for the Portal and controllers: Anker 511 Nano Pro 20W

One USB-C port with 20W. According to Anker it outputs 5 V / 3 A or 9 V / 2.22 A and measures 29.5 × 29.5 × 30 mm. No cable included. It's too weak for the Switch 2 in TV mode and for the Steam Deck. Shipped by Amazon, sold by AnkerDirect DE.

Power

20W

Output

5 V / 3 A, 9 V / 2.22 A

Ports

1 × USB-C

Size

29.5 × 29.5 × 30 mm

Right for you if you want to charge a PS Portal, a controller or a phone with a tiny charger.

View on Amazon.de*Ad link

Models compared

Model	Output (one port)	Ports	Switch 2 TV mode	Steam Deck
Nintendo adapter	approved by Nintendo	1	yes	not intended
Anker Nano II 65W	65W	1	yes per spec	yes
UGREEN Nexode 65W	65W	3	yes per spec	yes
Belkin BoostCharge Pro 67W	67W	2	yes per spec	yes
Baseus PicoGo 45W	45W	1	no (below 54W)	yes

Checklist before you buy

1. Should the Switch 2 run in the dock? Then at least 60W with 20V/3A.
2. Steam Deck only? 45W PD is enough.
3. Several devices at once? Find out how the power is split.
4. Do you have a cable, and is it rated for 60W?
5. Plugging the charger into a decent power strip? See the power strip buying guide.
6. On the go without a wall outlet? A power bank helps.

FAQ

Can I use my phone charger for the Switch 2?

For charging the console directly, yes, if it supports PD and delivers at least 54W, according to Nintendo. A 20W phone charger is unsuitable for TV mode per the ChargerLAB test.

Is a 65W charger enough for the Steam Deck?

Yes. Valve specifies 45W PD 3.0. More power doesn't hurt; the Deck only takes what it needs. It won't charge faster with more watts.

Does the Steam Deck charge on a dock with any charger?

The dock needs a PD charger that suits the Deck. For docks with passthrough charging, see the Steam Deck dock buying guide.

Do I need a Nintendo-licensed adapter?

Not strictly. Nintendo allows adapters from 54W but doesn't test them and warns about possible compatibility problems. The original is the safe choice.

Will a 100W charger damage the device?

No. With PD, both sides negotiate the right power. A certified, well-made charger is still a good idea.

How long does charging take?

Nintendo quotes about three hours for a full Switch 2 charge. How fast the Steam Deck charges depends on the charger, the cable and whether you play while charging.

Sources

As of November 2026.

• PlayStation: PlayStation Portal instruction manual (PDF, charging)
• Anker: 511 Charger (Nano Pro) specs
• Nintendo Support DE – So wird die Nintendo Switch 2-Konsole aufgeladen
• Nintendo Support – How to Charge the Nintendo Switch 2 Console (54W)
• Nintendo Support DE – Compatibility of Switch and Switch 2 accessories
• ChargerLAB – Compatibility Test of Nintendo Switch 2 (TV Mode)
• Valve – Steam Deck Tech Specs (45W PD 3.0)
• ChargerLAB – Steam Deck Charging Compatibility Test
• USB-IF – USB Type-C Cable and Connector Specification
• Anker – 715 Charger (Nano II 65W) specifications
• Verified amazon.de product pages: ASINs B0F3JP5ZF1, B094QJNYY2, B091BRJSRN, B0FVXN1TH1, B0DG5JZ99P

Manufacturers change firmware and compatibility. If something important changes, we update this article.